1, preface
EYCL-I automatic leak detection machine for precise measurement bottle and container leakage and trachoma. It can detect plastic and metal containers, sealed bags, pipes, solvents, tanks, industrial applications, such as the case. The equipment is to use the latest international technology, independent research and development of the latest models.
This system uses the high performance controller and the sensor, makes the system run more stable, the operation is more succinct. Modular structure, easy to use and easy to install
2, functional characteristics
The PLC - the latest model of the logic controller and touch screen technology;
The use of electrical equipment - class;
- with special purpose intermittent motor, ensuring reliable performance;
- using AIRTAC pneumatic technology;
We use the most simple operation, to achieve the most reliable and stable function;
The imported high precision micro differential pressure sensor;
L completely independent research and development, the unique process, simplify the operation and improve the detection speed and reliability.
3 technical specifications
3.1, the whole machine parameters
The detector shape length x width x high (mm): 1600x500x1450
- motor power: 120W
The detection of the barrel pressure range: 0.05Mpa
The maximum detection speed: 4 seconds / barrel
L detection head number: 1
The maximum detection bucket volume: 6L
The detection accuracy: Phi 0.1mm microporous
- Total Power: 0.5KW
Power requirements: 220V - 50Hz
- supply requirements: 0.6-1Mpa
4 construction and installation
After installation and debugging, to see whether the movement of the system is normal, the gas path is normal, as well as the normal operation. If these three normal, then the system has been debugged.
4.1 wiring and commissioning
1, the power supply of the equipment using 220V50Hz power supply;
2, due to the equipment noise filter and switching power supply using high frequency capacitance to the ground filter, and therefore must take the ground wire to the equipment ground terminal.
3, the system in the state of power, the prohibition of electronic components. After the power supply is cut off, the system must be waited for more than 1 minutes.
4.2 gas path installation instructions
1, supporting air compressor for low pressure type (0.6-1Mpa), the pressure is stable;
2, the outer diameter is 10mm, 8mm and 6mm plastic hose;
The temperature range is 5-50;